Pushbutton Controller

1) Printer must be in “Stopped” mode. Press until the screen shows “Stopped”

2) Press (F1)  then press (S1) (voltage)
 Change value if needed using the arrow keys (<  >), then press (enter) to finish.
SETTINGS: 4500=29 | 4711=13 | 4720=16.

3) Press (F1) then press (S2) (pulse width)
Change value if needed using the arrow keys (<  >), then press (enter) to finish.
SETTINGS: 4500=190 | 4711=180 | 4720=180.

4) Press (F1) then press (S) (setpoint)
Change value if needed using the arrow keys (<  >), then press (enter) to finish.
SETTINGS: 4500=40 | 4711=40 (downwards-printing=22) | 4720=22.


Touchscreen

For the Touchscreen controller you need to press SYSTEM SETUP then check that VOLTAGE, PULSE WIDTH and SETPOINT values are correct. Change the values using the ← → arrow keys and press EXIT once set.

VOLTAGE: 4500=29 | 4711=13 | 4720=16.
PULSE WIDTH: 4500=190 | 4711=180 | 4720=180
SETPOINT: 4500=40 | 4711=40 (downwards-printing=22) | 4720=22.